Tested & Certified
SCIGOLD CW505 4-Slot Smart Charger (Charger Only)
Standalone CW505 4-slot smart charger for SCIGOLD 1.5V AA Li-ion cells. USB-C input, per-cell LCD status, independent per-slot charging. Sold separately for owners who want a second charger or replacement.
- SKU
- SG-KIT5-LI41-CHARGER
Specs at a Glance
Everything in the spec sheet.
- Holds 4 × SCIGOLD AA 1.5V cells in independent slots
- Per-cell LCD status — see each cell's charge level
- USB-C 5V / 3A input — 380 mA × 4 per slot
- Slim flip-lid · pocket-sized rectangle
- Smart-chip cell recognition (works with SCIGOLD AA only)
- Smart Protection: over-charge / over-temp / short / over-discharge
The CW505 Charger. By Itself.
For owners who want a second CW505 — one for the desk, one for the bag. Or a clean replacement for a damaged unit.
Note: AA cells not included. Buy the 4-pack of cells separately or get the complete kit (cells + CW505).
Specifications
| Attribute | Value |
|---|---|
| Capacity | 4 independent slots |
| Compatible cells | SCIGOLD AA 1.5V Li-ion |
| Charger model | CW505 4-Slot Independent Smart Charger |
| Input | USB-C, 5V / 3A |
| Charging current | 380 mA × 4 (per slot) |
| Full-charge time | ~2 hours (4 cells from 0%) |
| Display | Per-cell LCD status |
| Material | Aluminum alloy + reinforced polymer, slim flip lid |
| Protections | Over-charge, over-temperature, short-circuit, over-discharge |
| Certifications | UN 38.3, IEC 62133-2, FCC, CE, RoHS |
| SKU | SG-KIT5-LI41-CHARGER |
Why a Second CW505?
- One at home, one in the bag — no thinking about whether you brought the charger
- Charge while you use — One CW505 charges while you run cells from another
- Backup — accidents happen; a spare charger is cheap insurance
Available Now. Order the CW505 →
How It Works
Full in 2 hours. Four steps.
- 1
Drop the cells into the charger
Place your SCIGOLD AA 1.5V Li-ion cells into the CW505 4-slot or CW508 8-slot charger, matching the + and − terminals shown in each slot. The smart chip recognizes SCIGOLD cells automatically.
- 2
Connect any USB-C power source
Plug a USB-C cable into the charger and connect it to any 5V/3A source — a phone wall charger, laptop USB-C port, GaN brick, power bank, or car charger. No proprietary adapter needed.
- 3
Watch the per-cell status display
The LCD (CW505) or per-slot LED (CW508) shows each cell charging independently. A nearly empty cell and a half-full one both charge to their own correct 1.5V target and stop when done.
- 4
Done in about 2 hours
Four cells charge from empty to full in roughly 2 hours at 5V/3A. Charging stops automatically when each cell is full — the Smart Protection System guards against over-charge, over-temperature, and short-circuit, so it is safe to leave plugged in.
Frequently Asked
Quick answers, before you buy.
Does the CW505 charger come with batteries?
Why would I buy the CW505 charger by itself?
How fast does the CW505 charge a full set of cells?
What does the per-cell LCD on the CW505 show?
Which batteries are compatible with the CW505 charger?
Is the CW505 charger safe to leave plugged in?
From the Lab